Lifting Eye Bolt M12 Din 580 Eye Bolt Stainless Steel Nut Din 580 M10 M20 M24 M30 M36
Description

The following guidelines of lifting eye bolts DIN 580 have to be observed in addition to the load values given in the above table:

The eye bolt must be of fully screwed in to achieve a perfect contact between the two mating faces.

Both threads must be of a equal length and the base material of equal strength to that of the bolt.

Operating instructions with more details and specifications are included with every delivery (see also www.ganternorm.com/en/service).

The official DIN standard sheet specifies the additional sizes M42, M48, M56, M64, M72 x 6, M80 x 6 und M100 x 6.

The lifting eyes shall be screwed tight against the surface. When two lifting eyes are used their mutual position shall result in the two eyes at the same level. Larger angle between the slings than 90° are not tolerated. Lifting eyes can not be assembled against a surface that differs essentially from a surface perpendicular to the direction of the lift.

• For lifting and transport activities.
• For security areas and high requirement.
• For permanent attachment to transport parts.
• With CE marking und user information.

We stock an extensive range of eye bolts, all finished in AISI 316 A4 marine grade stainless steel DIN 580.

Our metric coarse right hand thread eye bolts are available in a wide range of sizes, listed below, from 5mm right up to the larger 20mm.

Available in M5, M6, M8, M10, M12, M16, and M20 sizes.

They are most commonly used to attach ropes or cables to a fixed structure, threaded on one end for a more secure fit.

Marine grade, these eye bolts are tough, durable and corrosion resistant, ideal for maritime use or for a variety of applications such as construction.

Features:

• Generally used as a removable lifting point where a rated female thread or nut can be used
• Can be used as a termination for chain, wire rope and other assemblies where required
• Made from C15 carbon steel with zinc plated finish, manufactured with a standard larger eye (only available in metric thread sizes)
• Conforms to DIN580 marked with working load limit, nominal size, quality grade, batch numbered and supplier identification

Specification

Product size

15 din 580
20 din 580
40 din 580
din 580 8.8
din 580 a2
din 580 a4
din 580 eye bolt
din 580 eye bolt stainless steel
din 580 eye bolts
din 580 eye nut
din 580 lifting eye
din 580 lifting eye bolt
din 580 lifting eye bolts
din 580 m10
din 580 m12
din 580 m16 a2
din 580 m20
din 580 m24
din 580 m30
din 580 m36
din 580 m4
din 580 m42
din 580 m48
din 580 m5
din 580 m6
din 580 m8
eye bolt din 580
eye bolt din 580 m10-a2
eye bolt din 580 material
eye bolt m16 din 580
eye bolt m8 din 580
lifting eye bolt din 580
lifting eye bolt din 580-m8-st
lifting eye bolt m12 din 580
lifting eye bolts din 580
lifting eye din 580
lifting lug din 580
m12 din 580
m12 din 580 eye bolt
m36 din 580

EUROTECH FASTENERS (WUXI) CO., LTD, has been focusing on the hardware fastener industry for many years, based in the Yangtze River Delta and radiating across the country. Engaged in the research and development, production, sales and service of fastener products. The company is committed to building a passionate and energetic young team to serve on the front line and provide customers with comprehensive solutions.

Founded on innovation, founded on integrity, and founded on quality. The factory has established complete experimental equipment and has passed ISO9001 quality management system certification. The products have passed third-party testing and certification and comply with EU environmental protection requirements. We are produced in strict accordance with national standards (GB), German standards (DIN), American standards (ANSI), international (ISO), Japanese standards (JIS), British standards (BS), etc., and at the same time, we develop and process non-standard products according to customer needs. Customized drawings and samples.

We win customers with high-end quality and fast service. Our products are widely used in solar energy, wind energy, environmental protection equipment and engineering, communication equipment and engineering, power equipment and engineering, curtain wall doors and windows, subway rail transit, ships, pump valves, petrochemical industry, food machinery , dyeing and finishing equipment, LED lighting, outdoor furniture, automobiles and mechanical equipment and other industries.